SoundWater Technologies News & Updates
Featured
At SoundWater Technologies, we are excited to unveil our latest innovation – the SWT Thermal Energy Meter (TEM).
If you're setting up your Cypress or Orcas and having trouble getting a strong signal, it's often due to one of a few common installation issues. Here are some quick things to check before troubleshooting further.
Accuracy and repeatability come up in nearly every introductory discussion to clamp on ultrasonic. This is best answered initially with the general published specifications of +/- 1% accuracy “out of the box” with between 0.15% and 0.25% repeatability depending on the manufacturer…
Our latest feature allows users to manually adjust the number of ultrasound traverses across a pipe.
The new feature Coupling Pad Mode allows the flowmeter to use rubber coupling pads for transmitting ultrasound into the pipe.
The new Low Impedance Mode boosts flowmeter performance by pushing more current through the transducer, allowing ultrasound signals to penetrate deeper into corroded pipes or particulated fluids.
In the bustling world of cola and water processing plants, precision is key. At the heart of this efficiency lies a crucial tool: ultrasonic flowmeters. These devices, omnipresent on process lines, mineral skids, and CIP skids, play a pivotal role in monitoring water flow throughout the plant.
El Salvador’s national water utility Administración Nacional de Acueductos y Alcantarillados (ANDA) supplies almost 70% of the country’s potable water. A rapidly increasing population combination with constrained resources led to deferred maintenance across the network and the associated negative impact on reliability and performance.
We’re excited to announce that our Cypress Ultrasonic Flowmeter is now compliant for UL & CSA Electrical Safety.
We’re excited to announce that we have released our Class 1, Division 2 rating for the Cypress Ultrasonic Flowmeter.
The V75 Battery Pack for Orcas is designed to continuously power your Orcas Ultrasonic Flowmeter for up to 2 weeks. These battery packs can recharge via any USB port or from a solar panel. Battery packs can be charged while also charging your flowmeter.
SoundWater Technologies is happy to announce that we have completed C1D2 (hazardous area) certification, AND UL/CSA (electrical safety) compliance for the Cypress Ultrasonic Flowmeters.
SoundWater recently finished construction of a new flow calibration system. The new system will be used to test and calibrate clamp-on ultrasonic flowmeters.
We were recently approached by a customer with a few questions so we thought we would share our answers for others who might find themselves in similar situations.
The Oregon Water Resources Department (OWRD), alongside the United States Geological Survey (USGS) and the Washington Department of Ecology (Ecology), are currently conducting a collaborative bistate groundwater study in the Walla Walla Basin.
In this blog, we share quick steps on how to install your Orcas Flowmeter once your transducer spacing has been set and locked. SoundWater Ultrasonic Flowmeter set up is quick and easy, saving you time and money!
This blog outlines information on collecting data and data logging. The process is very similar for all of the SoundWater Ultrasonic Flowmeters.
We are often asked by customers if there is a difference between installing ultrasonic clamp-on flowmeters on vertical or horizontal pipes. In this short blog, we will discuss both cases.
Jeff Peery, founder and CEO, shares a new update to the Orcas App which includes controls to setup a security password for your flowmeter.
SoundWater Technologies recently released a new update to the Orcas App which includes controls to setup a security password for your flowmeter.
With all flowmeters, it is important to consider the tradeoff between measurement response time and smoothness or stability - to optimize your flow monitoring application.
In this short article, we share a few guidelines and illustrations to help you select the most critical component of ultrasonic flowmeters – the ultrasonic transducer.
SoundWater Technologies recently released a new T305 ultrasonic transducer that allows users to work with pipe sizes as large as 72" in diameter.
Jeff Peery share news about the new availability of the T305 Transducer for both the Orcas and Cypress Flowmeters in this short video.
SoundWater Technologies is please to announce that today we have released to production an all-new Lithium-Ion battery pack for our Orcas Portable Flowmeters.
In this short video, Jeff Peery, founder and CEO, shares a new feature within the SoundWater Flow Computer: a digital alarm if your process goes above or below a measurement value.
The data logger built into all SoundWater ultrasonic flowmeters will record flow for a specified period of time; from as little as one minute, or as long as one year. You set the time by sliding the recording time slider to specify how long you want to record
Jeff shares a new feature within the SoundWater Flow Computer, a useful and informative graphical display. You can now swipe to check out a five minute historical trend line, including flow and temperature.
In this second article of the "Diagnostics Feature" series, we will be discussing the new liquid temperature measurement.
SoundWater Technologies, LLC announced immediate availability of the new product to monitor changes in fracking fluid, and sand concentrations using ultrasound.
